background image

4

PRECAUTIONS

PLEASE READ CAREFULLY BEFORE PROCEEDING

Please keep this manual in a safe and handy place for future reference.

 WARNING

• This AC adaptor is designed for use with only Yamaha electronic 

instruments. Do not use for any other purpose.

• Indoor use only. Do not use in any wet environments.

 CAUTION

• When setting up, make sure that the AC outlet is easily accessible. If 

some trouble or malfunction occurs, immediately turn off the power 
switch of the instrument and disconnect the AC adaptor from the 
outlet. When the AC adaptor is connected to the AC outlet, keep in 
mind that electricity is flowing at the minimum level, even if the 
power switch is turned off. When you are not using the instrument 
for a long time, make sure to unplug the power cord from the wall 
AC outlet.

 WARNING

Always follow the basic precautions listed below to avoid the possibility of serious injury or even death from electrical 
shock, short-circuiting, damages, fire or other hazards. These precautions include, but are not limited to, the following:

• When one of the following problems occur, immediately turn off the 

power switch and disconnect the electric plug from the outlet. Then 
have the device inspected by Yamaha service personnel.

- When foreign matter or liquid gets inside this product.

- It emits unusual smells or smoke.

- There is a sudden loss of sound during use of this product.

• Use the specified adaptor (page 3) only. Using the wrong adaptor 

can result in damage to this product or overheating.

• Use only the supplied power cord. Using other power cords may 

cause heat or electric shock.

• This AC adaptor is designed for use with only Yamaha electronic 

instruments. Do not use for any other purpose. It may cause 
damage, heat or fire.

• The power adaptor is for indoor use only and should not be used 

outdoors or in a dripping environment.

• Do not expose the instrument to rain, use it near water or in damp or 

wet conditions, or place on it any containers (such as vases, bottles 
or glasses) containing liquids which might spill into any openings. 
If any liquid such as water seeps into the instrument, turn off the 
power immediately and unplug the power cord from the AC outlet. 

Then have the instrument inspected by qualified Yamaha service 
personnel.

• Never insert or remove an electric plug with wet hands.

• This product contains no user-serviceable parts. Do not open the 

instrument or attempt to disassemble or modify the internal 
components in any way. If it should appear to be malfunctioning, 
discontinue use immediately and have it inspected by qualified 
Yamaha service personnel.

• Always remove the power plug from the AC outlet before cleaning 

this product. Leaving the power plug connected presents a risk of 
electric shock.

• Check the electric plug periodically and remove any dirt or dust 

which may have accumulated on it.There is a risk of electric shock 
or short circuit.

• Use a dry cloth to wipe the units.It may cause an electric shock, fire 

or breakdown.

For the AC Adaptor

For the DKC-900

Power supply/AC adaptor

Location

Do not open

Maintenance

DMI-7

 1/2

Summary of Contents for Disklavier ENSPIRE DKC-900





























































Reviews: