Connecting external components such as a TV or DVD player to this unit.
Connect your TV or DVD player to this unit using appropriate cables as shown below.
After all connections are complete, plug the power supply cable into the AC wall outlet.
For further information on connecting other components, see pages 16 to 24 in the Owner’s Manual.
HTY-750
QUICK REFERENCE GUIDE
C
2007
All rights reserved.
Printed in Malaysia WM28920 [En]
R
L
VCR
TV/STB
VIDEO
TV/STB
AUX
OPTICAL
COAXIAL
DIGITAL INPUT
OUT
AUDIO INPUT
DVD
SYSTEM
CONNECTOR
SUBWOOFER
1
2
COAXIAL
AUDIO OUTPUT
L
R
VIDEO
INPUT
ANALOG AUDIO
OUTPUT
OPTICAL
AUDIO OUTPUT
R
L
VCR
TV/STB
VIDEO
TV/STB
AUX
OPTICAL
COAXIAL
DIGITAL INPUT
OUT
AUDIO INPUT
DVD
SYSTEM
CONNECTOR
SUBWOOFER
DVD player
TV
Decide where to install this unit.
Install this unit where there are no objects such as furniture obstructing the path of sound beams. Otherwise, the desired
surround sound effects may not be achieved. You may install this unit in parallel with the wall or in the corner.
HTY-750
Connecting external components to this unit
Installing this unit
This quick reference guide explains steps to connect a TV and a DVD player to this unit and achieve the
surround sound effects in a quick, easy manner. For detailed operation, refer to the Owner’s Manual.
Install this unit using a rack, etc.
Depending on your installation environment, connections with external components (see “2 Connecting external components to this unit”) can be done before
installing this unit.
We recommend that you temporarily place and arrange all components in order to decide which procedure must come first.
For further information on installation, see page 13 in the Owner’s Manual.
Install this unit in the exact center of the wall when it is
measured from the left and right corners.
Install this unit in the corner at a 40˚ to 50˚ angle from the
adjacent walls.
40˚ to 50˚
An object, such as furniture
An object, such as furniture
To the AC wall
outlet
1
3
2
Do not plug the power
supply cable into an AC
wall outlet until all
connections are complete.
1
2
Items used for connections and operations
in this guide
s
Audio pin cable (x1)
s
OSD* video pin cable (x1)
s
Optical cable (x1)
s
Digital audio pin cable (x1)
s
IntelliBeam microphone (x1)
s
Cardboard microphone stand (x1)
s
Demonstration DVD (x1)
*OSD: On-Screen Display
1. Pull out the cap
2. Check the direction
Front left channel
Center channel
Front right channel
Surround left channel
Surround right channel
Front left channel
Center channel
Front right channel
Surround left channel
Surround right channel
This connection example shows a way to connect external components such as a TV or DVD player to this unit by using the supplied cable.
You can enjoy the multi-channel audio from the DVD player and the analog/digital audio from the TV.
Use the video pin cable supplied with your DVD player to make a video connection between your DVD player and TV.
Connect the supplied cables in the following order.
3
Install this unit in the
rack.
1
Place this unit in front of
the rack.
If you have connected external components,
follow the steps on the backside to start the
AUTO SETUP procedure.
Continued
on the back
2
Connect this unit
to your TV and DVD player.
y
Hint
To enjoy better surround effects, place this unit on the upper shelf to keep it away from the floor.
Note
Be careful not to leave scratches on this unit or the rack.
Video connection
1
Audio pin cable
(Outputs
TV analog audio sounds
from this unit)
2
OSD video pin cable
(Displays
the HTY-750 menu screen
on the TV)
3
Optical cable
(Outputs
TV digital audio sounds
from this unit)
4
Digital audio pin cable
(Outputs
DVD digital audio sounds
from this unit)
4
4
Installation is completed.
The following is an example of installing this unit in a rack.
Note
Check whether the digital audio output of your TV and DVD
player is turned on.
Audio connection
Subwoofer
Optical cable
Pull out the cap
before connecting
the optical cable,
and then check the
direction to insert
the cable.
If a subwoofer is connected to this unit, turn on the power of your
subwoofer and then carry out the AUTO SETUP procedure (see the
backside) or select “SWFR” for “BASS OUT” in “SUBWOOFER SET” (see
page 62 in the Owner’s Manual).
System connection
0905_HTY-750_En_guide.p65
9/6/07, 4:18 PM
1
