11
DGX-530/YPG-535
(Fig.9)
12.
LCD Unit
(Time required: About 11 minutes)
12-1
Remove the lower case assembly. (See procedure 1.)
12-2
Remove the DM circuit board. (See procedure 2.)
12-3
Remove the four (4) screws marked [440J]. The LCD unit
can then be removed. (Fig.8)
13.
Speaker (Woofer)
(Time required: About 10 minutes)
13-1
Remove the lower case assembly. (See procedure 1.)
13-2
Remove the four (4) screws marked [80]. The speaker
(woofer) can then be removed. (Fig.9)
*
The left and right speakers (woofers) can be removed
in the same way.
11.
PNL Circuit Board
(Time required: About 12 minutes)
11-1
Remove the lower case assembly. (See procedure 1.)
11-2
Remove the AM circuit board. (See procedure 5.)
11-3
Remove the ten (10) screws marked [440F]. The PNL
circuit board can then be removed. (Fig.8)
(Fig.8)
[440]: Bind Head Tapping Screw-B 3.0X8 MFZN2W3 (WE774300)
[80]: Bind Head Tapping Screw-B 4.0X12 MFZN2W3 (WE981200)
[90]: Bind Head Tapping Screw-B 3.0X8 MFZN2W3 (WE774300)
[120]: Bind Head Tapping Screw-P 3.0X20 MFZN2W3 (WF492000)
[440J]
[440F]
PNL
LCD Unit
Upper Case
A-1
B-1 C0
[120B]
[120A]
[120A]
[120A]
C3
[120A]
B3
[120A]
[120A]
[120A]
[120C]
B6 C7
[80]
Speaker
(Woofer(R))
[90]
RELAY
Lower Case
[80]
Speaker
(Woofer(L))
