DGX-530/YPG-535
8
DISASSEMBLY PROCEDURE
<Bottom View>
]
0
6
4
[
]
0
6
4
[
]
0
6
4
[
[460]
[460]
[460]
[460]
[460]
]
0
5
4
[
]
0
5
4
[
]
0
5
4
[
]
0
5
4
[
[470]
[470]
Bottom Board (L)
Bottom Board (R)
<Bottom View>
1.
Lower Case Assembly
(Time required: About 9 minutes)
1-1
Remove the twenty (20) screws marked [470].
The bottom boards L and R can then be removed.
(Fig.2)
1-2
Remove the twenty four (24) screws marked [460] and
the eight (8) screws marked [450]. The lower case
assembly can then be removed. (Fig. 3)
Front Side (Printed Side)
Back side
(Fig.1)
Caution:
1) Flat cable’s contacts are visible from the back.
Pay attention not to insert and install the cable to the connector inversely. (Fig.1)
2) Be sure to attach the removed filament tape just as it was before removal.
[470]: Bind Head Tapping Screw-B 4.0X16 MFZN2W3 (WF154100)
(Fig.2)
[450]: Bind Head Tapping Screw-B 3.0X30 MFZN2W3 (WF491000)
[460]: Bind Head Tapping Screw-B 3.0X12 MFZN2W3 (WE987400)
(Fig.3)
