Yamaha Delight XC115S 2013 Owner'S Manual Download | Manualshive

Page: 52 / 74

background image

PERIODIC MAINTENANCE AND ADJUSTMENT

6-18

6

EAU22170

Adjusting the rear brake lever
free play

The brake lever free play should mea-
sure 10.0–20.0 mm (0.39–0.79 in) as
shown. Periodically check the brake le-
ver free play and, if necessary, adjust it
as follows.
To increase the brake lever free play,
turn the adjusting nut at the brake shoe
plate in direction (a). To decrease the
brake lever free play, turn the adjusting
nut in direction (b).

WARNING

EWA10650

If proper adjustment cannot be ob-
tained as described, have a Yamaha
dealer make this adjustment.

EAU22380

Checking the front brake pads
and rear brake shoes

The front brake pads and the rear brake
shoes must be checked for wear at the
intervals specified in the periodic main-
tenance and lubrication chart.

EAU22430

Front brake pads

Each front brake pad is provided with
wear indicator grooves, which allow
you to check the brake pad wear with-
out having to disassemble the brake.
To check the brake pad wear, check
the wear indicator grooves. If a brake
pad has worn to the point that the wear

1. Rear brake lever free play

1

1. Rear brake lever free play adjusting nut

ZAUU0716

1

1. Brake pad wear indicator groove

ZAUU0717

1

U2EPE0E0.book Page 18 Thursday, January 2, 2014 11:19 AM

«
...
50
51
52
53
54
...
»

Summary of Contents for Delight XC115S 2013











































































Reviews:

No comments

Related manuals for Delight XC115S 2013

Brand: UMAX Technologies Pages: 18

Brand: Robogo Pages: 15

Brand: Sterling Pages: 52

Multi-Point AWD

Brand: RMB EV Pages: 21

Brand: Roma Medical Pages: 20

24V Wave Catcher W301

Brand: Rollplay Pages: 24

PJ MASKS SCOOTER Series

Brand: Rollplay Pages: 24

Brand: Inventist Pages: 15

Brand: Volvo Pages: 10

with BOSCH System

Brand: Gazelle Pages: 40

Brand: Shoprider Pages: 20

Brand: Shoprider Pages: 26

Brand: Macwheel Pages: 6

MATRIX PN2H 50CC

Brand: E-TON Pages: 2

Brand: Stiga Pages: 20

Brand: TN’G Pages: 65

Brand: Radio Flyer Pages: 6

Brand: Bad Bike Pages: 62

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands