Yamaha Delight XC115S 2013 Owner'S Manual Download

Page: 41 / 74

PERIODIC MAINTENANCE AND ADJUSTMENT

6-7

EAU18722

Removing and installing the
cowling and panels

The cowling and panels shown need to
be removed to perform some of the
maintenance jobs described in this
chapter. Refer to this section each time
the cowling or a panel needs to be re-
moved and installed.

EAUU1090

Cowling A

To remove the cowling

1. Remove the screws from cowling

2. Pull cowling A off as shown.

TIP

When removing cowling A, pull out on
the areas shown from top to bottom.

To install the cowling

1. Align the projections on cowling A

with the slots of the inner cowling,
and then push cowling A into the
original position.

2. Install cowling A by installing the

screws.

TIP

When installing cowling A, push in on
the areas shown from bottom to top.

EAU19180

Panel A

To remove the panel

1. Remove cowling A. (See page

6-7.)

2. Remove the screws, and then take

the panel off.

To install the panel

1. Place the panel in the original posi-

tion, and then install the screws.

2. Install the cowling.

EAU19483

Panel B

To remove the panel

1. Open the seat. (See page 3-7.)

1. Cowling A

2. Panel A
3. Panel B

4. Panel C

1. Cowling A

1. Panel A

ZAUU0

U2EPE0E0.book Page 7 Thursday, January 2, 2014 11:19 AM

Summary of Contents for Delight XC115S 2013











































































Search results

Summary of Contents for Delight XC115S 2013

Reviews:

Related manuals for Delight XC115S 2013

Brands by name

Popular brands

Yamaha Delight XC115S 2013, Owner'S Manual

Search results

Summary of Contents for Delight XC115S 2013

Reviews:

Related manuals for Delight XC115S 2013

Brands by name

Popular brands