Yamaha Delight XC115S 2013 Owner'S Manual Download Page 24

Page: 24 / 74

INSTRUMENT AND CONTROL FUNCTIONS

3-8

From the “ON” position, turn the
key clockwise to “SEAT”.

3. Fold the seat up.

To close the seat

1. Fold the seat down, and then push

it down to lock it in place.

2. Remove the key from the main

switch if the motorcycle will be left
unattended.

TIP

Make sure that the seat is properly se-
cured before riding.

EAU37481

Helmet holders

The helmet holders are located under
the seat.

To secure a helmet to a helmet hold-
er

1. Open the seat. (See page 3-7.)
2. Attach a helmet to a helmet holder,

and then securely close the seat.

WARNING! Never ride with a
helmet attached to the helmet
holder, since the helmet may hit
objects, causing loss of control
and possibly an accident.

[EWA10161]

To release a helmet from a helmet
holder

Open the seat, remove the helmet from
the helmet holder, and then close the
seat.

1. Helmet holder

ZAUU0693

U2EPE0E0.book Page 8 Thursday, January 2, 2014 11:19 AM

Summary of Contents for Delight XC115S 2013











































































Search results

Summary of Contents for Delight XC115S 2013

Reviews:

Related manuals for Delight XC115S 2013

Brands by name

Popular brands

Yamaha Delight XC115S 2013, Owner'S Manual

Search results

Summary of Contents for Delight XC115S 2013

Reviews:

Related manuals for Delight XC115S 2013

Brands by name

Popular brands