manualshive.com logo in svg

Yamaha DCD1+PS, Operation Manual

Share
Download
Yamaha DCD1+PS Operation Manual Download Page 42

36

Balancing the CD
Volume (CD Master
Balance)

Before playing back PianoSoft.PlusAudio and

other audio/MIDI CDs, it is a good idea to first

balance the volume levels of the MIDI piano and

Audio parts.

Once you adjust the volume using the CD Master

Balance function, you can use the [VOLUME]

buttons on the remote control to conveniently

increase or decrease the overall volume in a

normal fashion.

These balance settings are stored in the Control

Unit, and are saved when the Disklavier is turned

off.

1

Play back a CD.

2

Press the Selector until the
BALANCE indicator lights.

BALANCE

TRANSPOSE

TEMPO

VOLUME 

The TG Master Balance display appears.

3

Press the Selector once more.

The CD Master Balance display appears.

4

Use the [–/NO] and [+/YES]
buttons to adjust the volume of
the Audio channel.

–/NO +/YES

5

Press the Selector until the
VOLUME indicator lights.

BALANCE

TRANSPOSE

TEMPO

VOLUME 

Summary of Contents for DCD1+PS
























































Reviews:

No comments

Brands by name

Popular brands

Load more brands