Yamaha DB50XG, Owner'S Manual

Page: 31 / 46

30
MIDI Data Tables/ Tableaux de données MIDI
Address Size Data Parameter Description Default
(H) (H) (H) value(H)
nn 69 1 00 - 7F PITCH EG INITIAL LEVEL -64 - +63 40
nn 6A 1 00 - 7F PITCH EG ATTACK TIME -64 - +63 40
nn 6B 1 00 - 7F PITCH EG RELEASE LEVEL -64 - +63 40
nn 6C 1 00 - 7F PITCH EG RELEASE TIME -64 - +63 40
nn 6D 1 01 - 7F VELOCITY LIMIT LOW 1 - 127 01
nn 6E 1 01 - 7F VELOCITY LIMIT HIGH 1 - 127 7F
TOTAL SIZE 3F
nn = Part Number (0 : Part 1, 1 : Part 2, 2 : Part 3, ... , 15 : Part 16)
For the DRUM PART, the following parameters have no effect.
• SOFT PEDAL • BANK SELECT LSB • MONO/POLY • SCALE TUNING • PORTAMENTO
• POLY AFTER TOUCH • PITCH EG INITIAL LEVEL • PITCH EG ATTACK TIME • PITCH EG RELEASE LEVEL • PITCH EG RELEASE TIME
< Table 1-5 >
MIDI Parameter Change table ( DRUM SETUP ) [XG]
Address Size Data Parameter Description Default
(H) (H) (H) value(H)
3n rr 00 1 00 - 7F PITCH COARSE -64 - +63 40
3n rr 01 1 00 - 7F PITCH FINE -64 - +63[cent] 40
3n rr 02 1 00 - 7F LEVEL 0 - 127 depend on the note
3n rr 03 1 00 - 7F ALTERNATE GROUP 0:OFF, 1 - 127 depend on the note
3n rr 04 1 00 - 7F PAN 0:random, L63...C...R63 (1...64...127) depend on the note
3n rr 05 1 00 - 7F REVERB SEND 0 - 127 depend on the note
3n rr 06 1 00 - 7F CHORUS SEND 0 - 127 depend on the note
3n rr 07 1 00 - 7F VARIATION SEND 0 - 127 7F
3n rr 08 1 00 - 01 KEY ASSIGN 0:SINGLE, 1:MULTI 00
3n rr 09 1 00 - 01 Rcv NOTE OFF 0:OFF, 1:ON depend on the note
3n rr 0A 1 00 - 01 Rcv NOTE ON 0:OFF, 1:ON 01
3n rr 0B 1 00 - 7F FILTER CUTOFF FREQUENCY -64 - +63 40
3n rr 0C 1 00 - 7F FILTER RESONANCE -64 - +63 40
3n rr 0D 1 00 - 7F EG ATTACK RATE -64 - +63 40
3n rr 0E 1 00 - 7F EG DECAY1 RATE -64 - +63 40
3n rr 0F 1 00 - 7F EG DECAY2 RATE -64 - +63 40
TOTAL SIZE 10
[Note] n : Drum Setup number (0, 1)
rr : note number (0D - 5B)
When XG system on or GM mode on messages are received, all Drum Setup parameters are initialized.
The Drum Setup Reset message can be used to initialized each Drum Setup parameter.
Selecting a Drum Set will cause the Drum Setup parameter values to be initialized.
< Table 2-2 >
MIDI Bulk Dump table ( USER NORMAL VOICE ) [QS300]
Address Size Data Parameter Description
(H) (H) (H)
[Common]
11 nn 00 17D 20 - 7E VOICE NAME
:
07
08
NOT USED
: NOT USED
0A NOT USED
0B 01 - 03 ELEMENT SWITCH 1:Element 1 on, 2:Element 2 on, 3:Element 1 and 2 on
0C 00 - 7F VOICE LEVEL
0D NOT USED
: NOT USED
3C NOT USED
[Element 1]
3D 00 - 7F WAVE NUMBER HIGH bit13 - bit7
3E 00 - 7F WAVE NUMBER LOW bit6 - bit0
3F 00 - 7F NOTE LIMIT LOW
40 00 - 7F NOTE LIMIT HIGH
41 00 - 7F VELOCITY LIMIT LOW
42 00 - 7F VELOCITY LIMIT HIGH
43 00 - 01 FILTER EG VELOCITY CURVE
44 00 - 02 LFO WAVE SELECT 0:saw, 1:tri, 2:S&H
45 00 - 01 LFO PHASE INITIALIZE 0:OFF, 1:ON
Bulk Dump
Address
High Mid
Low Description
User Normal Voice 11 00 00 User Normal Voice 1
: :
11 1F 00 User Normal Voice 32
Parameter Base Address
Model ID = 4B [ QS300 ] < Table 2-1 >