Yamaha CSD-R7, Systems Setup Manual

Page: 19 / 58

RIVAGE PM7 System Setup Guide
19
UTILITY section
1
POWER Indicator
Lights when AC power to the unit is ON. If both
power switches A and B are turned on, this indicator
will light green. If either power switch A or B is
turned on, it will light red. If the RIVAGE PM7
system is not started, it will light orange.
2
USB port
Enables you to connect a USB device (such as a
mouse, keyboard, or USB flash drive). Use a USB
flash drive to store the system’s internal data and to
load the stored data into the system.
■
Supported USB flash drive format
The FAT16 and FAT32 formats are supported.
■
Write Protection
Some USB flash drives feature write protection that
prevents data from being erased inadvertently.
If your USB flash drive contains important data, we
suggest that you use write protection to prevent
accidental erasure.
On the other hand, you will need to make sure that
your USB flash drive’s write-protect setting is turned
off before you save data onto the USB flash drive.
For the latest information on which USB flash drives
can be used with the system, visit the Yamaha Pro
Audio website at:
http://www.yamaha.com/proaudio/
NOTICE
Do not remove the USB flash drive from the USB
connector or turn off the power to the unit while the unit is
accessing data, e.g., saving, loading or deleting data.
Doing so may damage your flash drive, or may damage the
data in the unit or on your media device.
3 RECORDING port
Enables you to connect a USB flash drive to record
and play back audio files. Supported file formats
include WAV and MP3.
For the latest information on what USB flash drives
can be used with the system, visit the Yamaha Pro
Audio website at:
http://www.yamaha.com/proaudio/
4 [SYSTEM] key
Press this key to display information about the
RIVAGE PM7 system on the touch screens.
Press and hold down the key for two seconds or
longer to shut down the control section of the console
(
➔
page 29). Be sure to shut down before turning off
the power to the unit.
5 TALKBACK jack
This is a balanced XLR-3-31 jack to which a talkback
mic can be connected.
6 +48V indicator
Lights up when +48V phantom power is supplied to
the TALKBACK jack.
7 TALKBACK [LEVEL] knob
Adjusts the input level of the mic connected to the
TALKBACK jack.
8 TALKBACK [ON] key
Switches the Talkback function on or off.
9 MONITOR A/B [LEVEL] knobs
Adjust the output level of the monitoring signals.
1
2
3
4
5
6
7
8
9