Yamaha CS-700 Series Integrators Reference Manual Download Page 146

Page: 146 / 166

Yamaha CS-700 Integrators Reference Guide

146

(DNS) server.

net.dns2

TEXT

IP address.

Address of the secondary

Domain Name System

(DNS) server.

net.vlan

INDEXED_

OPTION

0 : Manually specify

VLAN ID

1 : Disable VLAN

2 : Automatically

detect VLAN ID

Specifies VLAN behavior

and support for the device.

net.vlan-id

NUMBER

1..4094 : VLAN ID

The manually specified LAN

ID. If the VLAN mode is

automatic, this is the

detected VLAN ID if VLAN is

active.

net.ntp1

TEXT

IP address or URL or

DNS name.

0.pool.ntp.org Configure first NTP

(Network Time Protocol)

server address.

net.ntp2

TEXT

IP address or URL or

DNS name.

1.pool.ntp.org Configure second NTP

(Network Time Protocol)

server address.

net.ntp3

TEXT

IP address or URL or

DNS name.

2.pool.ntp.org Configure third NTP

(Network Time Protocol)

server address.

net.ntp4

TEXT

IP address or URL or

DNS name.

Configure fourth NTP

(Network Time Protocol)

server address.

net.dot1x-

enabled

BOOLEAN

0 : Disable 802.1x

authentication

1 : Enable 802.1x

authentication

Enables 802.1x

authentication to access

the network. When

enabled, the 802.1x

authentication type and

the required credentials

also need to be specified.

MD5 authentication

requires a username and

password.

Summary of Contents for CS-700 Series







































































































































































Search results

Summary of Contents for CS-700 Series

Reviews:

Related manuals for CS-700 Series

Brands by name

Popular brands

Yamaha CS-700 Series, Integrators Reference Manual

Search results

Summary of Contents for CS-700 Series

Reviews:

Related manuals for CS-700 Series

Brands by name

Popular brands