Yamaha CS-700 Series Integrators Reference Manual Download Page 43

Page: 43 / 166

Yamaha CS-700 Integrators Reference Guide

Command Definition:

Action

Definition

get

get upgrade-status

response

val upgrade-status <"status">

notify

notify sys.upgrade-status <"status">

Parameters:

Parameter

Description

Ready

Ready for upgrade

Downloading

Downloading upgrade file

Failed

Upgrade failed.

Flashing

Writing upgrade to flash memory.

WaitingCallEnd

If any call is active, upgrade suspended until call ends.

Rebooting

Upgrade complete, rebooting system.

CLI Format Examples:

get upgrade-status

val upgrade-status Flashing

notify sys.upgrade-status Flashing

Supported Products: CS700-AV, CS700-SP

Available in API Version: 1.0

camera-upgrade-status

Description:

Indicates the camera module upgrade status.

Property Actions:

get, notify

Command Definition:

Action

Definition

get

get camera-upgrade-status

response

val camera-upgrade-status <"upgrade-status">

notify

notify sys.camera-upgrade-status <"upgrade-status">

Parameters:

Parameter

Description

Started

Upgrade has started.

Downloading

Downloading upgrade file.

Rebooting

Rebooting after upgrade.

Complete

Upgrade successful and complete.

Failed

Upgrade failed

pmuterogress

Progress of update. This string will be followed by percent complete.

Current

This is synonymous with complete. Revision of upgrade and current FW match.

Summary of Contents for CS-700 Series







































































































































































Search results

Summary of Contents for CS-700 Series

Reviews:

Related manuals for CS-700 Series

Brands by name

Popular brands

Yamaha CS-700 Series, Integrators Reference Manual

Search results

Summary of Contents for CS-700 Series

Reviews:

Related manuals for CS-700 Series

Brands by name

Popular brands