Yamaha CS-700 Series Integrators Reference Manual Download Page 100

Page: 100 / 166

Yamaha CS-700 Integrators Reference Guide

100

set reg-use-proxy 0

notify voip.reg-use-proxy 0

Supported Products: CS700-SP

Available in API Version: 1.1

user

Description:

SIP username for the account used to authenticate with the SIP registrar and proxies.

Required for VoIP support.

Property Actions:

set, get, notify

Command Definition:

Action

Definition

get

get user

response

val user <"user-name">

set

set user <"user-name">

notify

notify voip.user <"user-name">

Parameters:

Parameter

Description

user-name

String. SIP username.

CLI Format Examples:

get user

val user testuser

set user testuser

notify voip.user testuser

Supported Products: CS700-SP

Available in API Version: 1.1

password

Description:

SIP password for the account used to authenticate with the SIP registrar and proxies.

Required for VoIP call support.

Property Actions:

set, get, notify

Command Definition:

Action

Definition

get

get password

response

val password <"password">

set

set password <"password">

Summary of Contents for CS-700 Series







































































































































































Search results

Summary of Contents for CS-700 Series

Reviews:

Related manuals for CS-700 Series

Brands by name

Popular brands

Yamaha CS-700 Series, Integrators Reference Manual

Search results

Summary of Contents for CS-700 Series

Reviews:

Related manuals for CS-700 Series

Brands by name

Popular brands