136
■
User Scale
..................................................................................................................
This function allows you to individually tune each key within an oc-
tave.
The setting made for one key is automatically assigned to the same
key in all other octaves.
Z
Select
USER
with the left-most LCD button left; the following dis-
play will appear.
X
Press the desired key to be tuned.
➔
The note name and the current tuning value of the pressed key
appears.
C
Set the pitch by pressing the
TUNE
▼
or
▲
buttons, or by using the
data dial or
[–/+]
buttons. You can play the key being tuned to check
the sound during this operation. The default tuning of
±
0 cents can be
instantly recalled for the selected key by simultaneously pressing the
TUNE
▼
and
▲
buttons.
Scale Tuning — User
• Range: –64 cents — +63 cents
• Basic Value: 0 (for all keys)
• Backup of last settings: OFF
SAVE
See page 125.
NAME
See page 125.
LOAD
See page 126.
DELETE
See page 126.
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
Utility
V
Repeat steps 2 and 3 until all the required keys have been tuned.
................................................................................................................................................
The completed tuning can be named as a tuning file and saved to
disk. It can also be loaded whenever necessary or deleted if not needed.
Make sure that a proper disk (either containing the scale tuning data
or set up for saving) is inserted in the disk drive before executing these
file operations.
Z
Select the desired file operation.
Use the LCD button located second from right to select the desired
file operation:
LOAD
,
SAVE
,
DELETE
or
NAME
.
X
Press the
START
button.
After the
START
button is pressed, the display corresponding to the
selected file operation appears.
The subsequent steps are the same as those explained on pages 125
and 126. Refer to the pages below, depending on the selected file
operation.
