Vocal Harmony Settings
CVP-609/605 Reference Manual
29
4
Set the parameters which determine how the Harmony notes are applied.
Balance Adjustment for each Lead note and Harmony note
You can make independent settings for the Lead note (microphone sound) and the Harmony notes.
•
Detune:
Determines the fine pitch setting for each Harmony note from -50 cents to +50 cents.
•
Pan:
Determines the pan position setting for each Harmony note. Setting each Harmony note to a different pan
position, with the Lead vocal at center, for example, results in a naturally wide stereo sound.
•
Volume:
Determines the volume setting for each Harmony note. Use this to adjust the relative level balance
among the Lead vocal and the Harmony notes.
Detail Setting
The available parameters differ depending on the Vocal Harmony type.
5
Balance
Lets you set the balance between the lead vocal (the microphone sound) and Vocal
Harmony sound. Raising this value increases the volume of the Vocal Harmony and
decreases that of the lead vocal. When this is set to L<H63 (L: Lead Vocal, H: Vocal
Harmony), only the Vocal Harmony is output; when it is set to L63>H, only the lead
vocal is output.
6
(When the Mode is set to “Chordal”)
Chord Source
Determines which data or event of a Song will be used for chord detection.
• Off:
Detects no chord from the Song data.
• XF:
Chord data defined via XF will be used.
• 1 – 16:
Detects a chord from notes of the MIDI channel specified here.
7
(When the Mode is set to “Vocoder”)
Song Ch Mute/
Play
When set to “Mute,” the channel selected above (
4
) is muted (turned off) during
Song playback.
Keyboard
• Off:
Keyboard control over harmony is turned off.
• Upper:
Notes played to the right of the Split Point control the harmony.
• Lower:
Notes played to the left of the Split Point control the harmony.
VOCODER TYPE
Determines how the harmony notes are applied to the microphone sound when the
Harmony Mode (
) is set to “Vocoder.”
CHORDAL TYPE
Determines how the harmony notes are applied to the microphone sound when the
Harmony Mode (
) is set to “Chordal.”
CHROMATIC TYPE
Determines how the harmony notes are applied to the microphone sound when
“SpdyMouse,” “SingBass,” or “ChromatXG” is selected as the Vocal Harmony type.
DETUNE TYPE
Determines how the harmony notes are applied to the microphone sound when
“DetuneXG” is selected as the Vocal Harmony type.
HARM GENDER
TYPE
Determines whether the gender of the harmony sound is changed or not.
• Off:
The gender of the harmony sound is not changed.
• Auto:
The gender of the harmony sound is changed automatically.
LEAD GENDER
TYPE
Determines whether and how the gender of the lead vocal sound (i.e., the direct
microphone sound) will be changed. Please note that the number of harmony notes
differs depending on the selected type. When set to “Off,” three harmony notes are
produced. Other settings produce two harmony notes.
• Off:
No gender change occurs.
• Unis:
No gender change occurs. You can adjust the LEAD GENDER DEPTH
described below.
• Male:
The gender change (to male) is applied to the lead vocal.
• Fem.:
The gender change (to female) is applied to the lead vocal.
