Setting the input channels
Owner’s Manual
41
Patching the mixer output to the I/O rack
1.
Press the RACK button in the display screen,
then press the I/O RACK tab.
2.
Press the HA parameter area for the I/O rack
(that will be the output destination).
3.
Press the OUTPUT tab.
4.
Press the OUTPUT 1 button.
5.
In the PORT SELECT screen, select the output
channels you want to output to the rack.
6.
Press the CLOSE button.
7.
In the same way, set OUTPUT 2 and
subsequent outputs, if necessary.
Setting the input channels
Switching phantom power on or off
1.
Press the [SEL] key for the channel that you
want to control in the Channel Strip section
or Centralogic section.
2.
Press the GAIN knob in the SELECTED
CHANNEL section.
3.
Press the +48V button in the GAIN/PATCH
popup window as necessary, depending on
the microphone you use.
NOTE
The phantom power master switch on the I/O rack must be
turned on first.
Adjusting the analog gain
1.
Press the [SEL] key for the channel that you
want to control in the Channel Strip section
or Centralogic section.
2.
Press the [CUE] key of the same channel.
3.
While checking the sound level through the
headphones and meters, adjust the channel
[GAIN] knob of the Channel Strip section.
4.
Adjust the gain level for other channels in the
same way, by pressing their [SEL] and [CUE]
keys, and then rotating the [GAIN] knobs.
5.
After adjustment is complete, switch the
[CUE] key off (the key LED turns off).
GAIN knob
➩
Summary of Contents for CL3
Page 1: ...EN Owner s Manual Keep This Manual For Future Reference...
Page 60: ......