32
3
Start “Windows Media Player.” In the menu bar, select Tools, Options and
CD Audio tab.
4
Uncheck the “Digital playback” in the “Playback Settings” item.
For Windows XP
1
Follow the steps 1 and 2 on the page 31, and uncheck the “Enable digital CD
audio for this CD-ROM device.”
2
Start “Windows Media Player.” In the menu bar, select Tools, Options,
Devices tab, CD-RW Drive, and Properties.
3
Select “Analog” in the “Playback” item.
7
No data can be read from any CDs, a disc is ejected spontaneously, or
the LED remains purple when a disc is inserted. (The LED does not change
from lighting purple to blinking blue and then lighting blue.) (P. 2)
Remove the IDE cable from the CRW3200E drive while the 4-pin internal
power cable is connected to the drive, and insert the disc once again. If no data
can be read from a specific disc or a specific disc is ejected, the disc itself may
be damaged or deformed.
If the LED remains purple or a disc is ejected, no matter what type of disc (e.g.,
an audio CD, CD-ROM or blank CD, etc.) is inserted, contact the store of
purchase or your nearest Yamaha dealer (listed at the back of this manual).
Uncheck
(This screen is an
example on Windows
Media Player 7.0.)
Select
(This screen is an
example on Windows
Media Player 8.0.)
