26
Loading/Ejecting a Disc
Prior to the operation, check that the computer is turned on.
1
Open the disc tray by pressing the eject button.
2
Place the disc onto the disc tray properly with its label
facing upward.
Or remove the disc from the disc tray carefully so not to damage it.
3
Close the disc tray by pressing the eject button or by gently
pushing the disc tray into the computer.
• Place or remove the disc after the disc tray has fully opened. Do not push or
pull the disc tray with applying excessive force to avoid damage to the drive
or the disc.
• The disc tray does not open while the application software prohibits ejecting,
including when the drive accesses the disc.
Note
Press the eject button.
Place or remove the disc onto/
from the disc tray properly.
