8
Preparing the CRW3200E Drive
Preparing tools
• Phillips screwdriver: Use the proper screwdriver
for the screws to install the CRW3200E drive into
the computer.
• Narrow pliers: Insert and remove the included
plastic shunt for the jumper switch.
The serial number is printed on the label on the top of your CRW3200E drive.
When you have a question about the drive, or need user support services, the
serial number is required.
Please write the serial number down in the space below prior to installing the
CRW3200E drive into your computer. It will be difficult to check the serial
number after installation.
Serial Number
Serial Number
Serial number
(10 characters: 3 l
7 numbers)
