manualshive.com logo in svg

Yamaha BIG BEAR YFM400NC, Owner'S Manual, Page: 76 / 162

Share
Download
Yamaha BIG BEAR YFM400NC Owner'S Manual Download Page 76

7-9

Pre-operation checks

Always perform the pre-operation checks
listed on page 5-1 before riding for safety
and proper care of the machine.

WARNING

POTENTIAL HAZARD
Failure to inspect the ATV before oper-
ating.
Failure to properly maintain the ATV.

WHAT CAN HAPPEN
Increases the possibility of an accident
or equipment damage.

HOW TO AVOID THE HAZARD
Always inspect your ATV each time you
use it to make sure the ATV is in safe op-
erating condition. Always follow the in-
spection and maintenance procedures
and schedules described in the Owner’s
Manual.

WARNING

POTENTIAL HAZARD
Operating this ATV with improper tires,
or with improper or uneven tire pres-
sure.

WHAT CAN HAPPEN
Use of improper tires on this ATV, or op-
eration of this ATV with improper or un-
even tire pressure, may cause loss of
control, increasing your risk of an acci-
dent.

HOW TO AVOID THE HAZARD
Always use the size and type tires spec-
ified in the Owner’s Manual for this ve-
hicle on pages 5-9 ~ 5-10.
Always maintain proper tire pressure as
described in the Owner’s Manual on
page 5-11.

All manuals and user guides at all-guides.com

all-guides.com

Summary of Contents for BIG BEAR YFM400NC



































































































































































Reviews:

No comments