manualshive.com logo in svg

Yamaha BIG BEAR YFM400NC, Owner'S Manual, Page: 52 / 162

Share
Download
Yamaha BIG BEAR YFM400NC Owner'S Manual Download Page 52

5-10

2. The tires should be set to the recom-

mended pressure:

●

Recommended tire pressure

Front 25 kPa (0.25 kgf/cm

2

, 3.6 psi)

Rear 25 kPa (0.25 kgf/cm

2

, 3.6 psi)

●

Check and adjust tire pressures when
the tires are cold.

●

Tire pressures must be equal on both
sides.

3. Tire pressure below the minimum

specified could cause the tire to dis-
lodge from the rim under severe
riding conditions. 
The following are minimums:
Front 22 kPa (0.22 kgf/cm

2

, 3.2 psi)

Rear 22 kPa (0.22 kgf/cm

2

, 3.2 psi)

4. Use no more than the following pres-

sures when seating the tire beads.
Front 250 kPa (2.5 kgf/cm

2

, 36 psi)

Rear 250 kPa (2.5 kgf/cm

2

, 36 psi)

Higher pressures may cause the tire
to burst. Inflate the tires very slowly
and carefully. Fast inflation could
cause the tire to burst.

All manuals and user guides at all-guides.com

Summary of Contents for BIG BEAR YFM400NC



































































































































































Reviews:

No comments