Yamaha BIG BEAR YFM400NC Owner'S Manual Download Page 41

Page: 41 / 162

4-19

EBU00631*

Auxiliary DC jack

The auxiliary DC jack is located at the front
right side of the ATV.
The auxiliary jack can be used for suitable
work lights, radios, etc.
The auxiliary jack can only be used when
the main switch is in the “ON” position.

1. Turn the headlight to the “OFF” posi-

tion.

2. Start the engine. (See page 6-1 ~ 6-3.)
3. Open the cap and insert the power

plug into the auxiliary jack.

4. When the auxiliary jack is not being

used, cover it with the cap.

Maximum rated capacity for the
auxiliary DC jack:

DC 12 V, 120 W (10 A)

1. Auxiliary DC jack

2. Cap

All manuals and user guides at all-guides.com

all-guides.com

Summary of Contents for BIG BEAR YFM400NC



































































































































































Search results

Summary of Contents for BIG BEAR YFM400NC

Reviews:

Related manuals for BIG BEAR YFM400NC

Brands by name

Popular brands

Yamaha BIG BEAR YFM400NC, Owner'S Manual

Search results

Summary of Contents for BIG BEAR YFM400NC

Reviews:

Related manuals for BIG BEAR YFM400NC

Brands by name

Popular brands