Yamaha BEARTRACKER YFM250XC, Service Manual

Page: 61 / 398

3 - 7
INSP
ADJ
REAR FENDER/FUEL TANK
6.Install:
●
Rear carrier 1
NOTE:
Do not forget to attach the spacer at the
point where the carrier and bumper are
connected.
T
R
.
.
Bolt 2 (rear carrier and frame):
34 Nm (3.4 m • kg, 25 ft • lb)
Bolt 3 (rear carrier and rear
bumper):
9 Nm (0.9 m • kg, 6.5 ft • lb)
FUEL TANK
Removal
1.Place the machine on a level place.
2.Remove:
●
Seat
Refer to the “REAR FENDER – Removal”
section.
3.Disconnect:
●
Breather hose
1
(tank cap side)
4.Remove:
●
Bolt
2
(with flange collar)
●
Screw
3
●
Rivet
4
●
Fuel tank cap
5
●
Fuel tank cover
6
5.Remove:
●
Damper plate 1
NOTE:
After removing the damper plate, immedi-
ately install the tank cap on the fuel tank.
3