Yamaha BEARTRACKER YFM250XC, Service Manual

Page: 234 / 398

7 - 6
CHAS
INSTALLATION
Reverse the “REMOVAL” procedure.
Note the following points.
1.Lubricate:
●
Oil seal lips 1
●
Bearings 2
●
Camshaft 3
●
Pivot pin 4
●
O-ring 5
CAUTION:
Install the camshaft and the pivot pin
lightly greased. Wipe off the excess grease.
Lithium-soap base grease
2.Install:
●
Pivot pin 1
●
Brake camshaft holder 2
T
R
.
.
Pivot pin bolt 3 :
10 Nm (1.0 m • kg, 7.2 ft • lb)
Brake camshaft holder bolt 4 :
10 Nm (1.0 m • kg, 7.2 ft • lb)
3.Install:
●
Brake camshaft
1
●
Wear indicator plate
2
●
Brake camshaft lever
3
NOTE:
●
When installing the wear indicator plate
2 to the brake camshaft 1 align the pro-
jection
a
on the wear indicator plate with
the slot
b
on the brake camshaft.
●
Align the punched mark
c
on the brake
camshaft 1 with the punched mark
d
on
the brake camshaft lever 3 .
T
R
.
.
Brake camshaft lever:
9 Nm (0.9 m • kg, 6.5 ft • lb)
FRONT WHEELS AND FRONT BRAKE
7