Yamaha BEARTRACKER YFM250XC, Service Manual

Page: 265 / 398

7 - 37
CHAS
5.Remove:
●
Nut 1 (shock absorber - upper)
●
Bolt 2
●
Shock absorber 3
REAR SHOCK ABSORBER AND SWINGARM
6.Remove:
●
Spring (rear brake pedal) 1
7.Remove:
●
Caps (pivot shaft)
8.Inspect:
●
Swingarm free play
*********************************
Free play inspection steps:
●
Check the tightening torque of the pivot
shafts
1 and locknut 2 (right side of pivot
shaft).
●
Check the swingarm side play
Å
by mov-
ing it from side to side.
If side play noticeable, check the spacer
collar, bearing and frame pivot.
●
Check the swingarm vertical movement
ı
by moving it up and down.
If vertical movement is tight, binding or
rough, check the spacer collar, bearing
and frame pivot.
*********************************
T
R
.
.
Pivot shaft (left side):
130 Nm (13.0 m • kg, 94 ft • lb)
Pivot shaft (right side):
6 Nm (0.6 m • kg, 4.3 ft • lb)
Locknut (right side of pivot shaft):
130 Nm (13.0 m • kg, 94 ft • lb)
Free play limit:
1.0 mm (0.04 in)
7