Yamaha BANSHEE YFZ350M 1999, Owner'S Manual

Page: 139 / 166

8-34
EBU00351
Drive chain slack adjustment
1. Loosen the rear wheel hub bolts.
1. Upper wheel hub bolt (
×
2)
2. Lower wheel hub bolt (
×
2)
2. Loosen the adjuster locknuts on each
side. To tighten the chain, turn the
chain adjuster clockwise. To loosen the
chain, turn the adjuster counterclock-
wise and push the wheel forward. Turn
each adjuster exactly the same amount
to maintain correct axle alignment.
There are marks on each side of the
swingarm and on each chain adjuster.
Use them to check for proper alignment.
3. After adjusting, be sure to tighten the
locknuts and the wheel hub bolts.
Upper wheel hub bolt:
120 Nm (12.0 m•kg, 85 ft•lb)
Lower wheel hub bolt:
60 Nm (6.0 m•kg, 43 ft•lb)
q
w
q
w
e
1. Locknut 2. Adjuster 3. Alignment marks
5FK-9-12-3 4/11/0 12:45 AM Page 35