manualshive.com logo in svg

Yamaha AW2400, Owner'S Manual

Share
Download
Yamaha AW2400 Owner'S Manual Download Page 268

About the CD-ROM included with the AW2400

268

Appendix

AW2400  Owner’s Manual

In order to restore the internal hard disk to the factory-set 
condition, you will need to perform the following two pro-
cedures.

A

Initialize the internal hard disk

B

Load the demo song

Initialize the internal hard disk. (

→

 p. 212)

When you initialize the internal hard disk, the system set-
tings will return to their factory-set state.

You can load the demo song from the included CD-ROM 
to restore the AW2400 to its factory-set condition.

1

Insert the included CD-ROM into the CD-RW 
drive of the AW2400.

2

Call the SONG screen Restore page by either 
pressing the Work Navigate section [SONG] 
key as many times as necessary.

3

Make sure that the cursor is located at the 
READ CD INFO button, and press the 
[ENTER] key.

Loading from the CD-ROM will begin. When loading 
is finished, the contents of the display will change as 
follows.

4

Move the cursor to the list and press the 
[ENTER] key.

The symbol at the left of the list will change to “

●

”.

5

Move the cursor to the RESTORE button and 
press the [ENTER] key.

6

A popup window will ask you for confirma-
tion, so move the cursor to the OK button or 
CANCEL button, and press the [ENTER] key.

While the Restore operation is being executed, the 
state of progress will be shown in a popup window. 
When this popup window closes, the operation has 
been completed.

• Windows

• Logic Platinum 5.5.1

 (*1)

• Cubase SX 3.0.1

• Nuendo 3.0.1

• Sonar 4.0.1 Producer Edition

• Macintosh

• Logic Pro 7.0.1

 (*1)

• Cubase SX 3.0.1

• Nuendo 3.0.1

• Protools TDM 6.7

 (*2)

*1 Use the setting file from the included CD-ROM to map the 

AW2400’s faders/[ON] keys/transport keys to the Logic key 
commands. Track assignments must be made within Logic 
as appropriate for your system.

*2 Select the CS-10 settings as the MIDI controller type. For 

details on the CS-10 settings, ask Digidesign.

Restoring the internal hard disk to the 
factory-set condition

■

Initializing the internal hard disk

• Executing this operation will erase all data from the internal hard 

disk, and the data cannot be recovered. We recommend you to 
backup all data on the internal hard disk to a computer before exe-
cuting this operation.

NOTE

■

Loading the demo song

Installing a remote file

■

Supported DAW software

Summary of Contents for AW2400

































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands