background image

Setting the use of a subwoofer

Selects the setting according to the use of your subwoofer.

Setup menu

“Speaker” > “Configuration” > “Subwoofer”

Settings

Use

Select this option when a subwoofer is connected.
The subwoofer will produce LFE (low-frequency effect) channel audio and

low-frequency components from other channels.

None

Select this option when no subwoofer is connected.
The front speakers will produce LFE (low-frequency effect) channel audio

and low-frequency components from other channels.

Setting the phase of the subwoofer

Sets the phase of the subwoofer. When the bass sound is lacking or unclear, switch
the subwoofer phase.

Setup menu

“Speaker” > “Configuration” > “Subwoofer” > “Phase”

Settings

Normal

Does not reverse the subwoofer phase.

Reverse

Reverses the subwoofer phase.

NOTE

 This setting is not available when “Subwoofer” is set to “None”. For details on “Subwoofer” in the “Setup”

menu, see the following:

▪ “Setting the use of a subwoofer” (p.114)

 

 

Setting the distance between each speaker and the

listening position

Sets the distance between each speaker and the listening position so that sounds from

the speakers reach the listening position at the same time.

Setup menu

“Speaker” > “Distance”

Choices

Front L, Front R, Center, Surround L, Surround R, Surround Back L, Surround Back R,
Presence L, Presence R, Subwoofer

Setting range

0.30 m to 24.00 m (1.0 ft to 80.0 ft), 0.05 m (0.2 ft) increments

NOTE

Select the unit of distance from “Meter” or “Feet” in “Unit”.

Adjusting the volume of each speaker

Adjusts the volume of each speaker to suit your listening position.

Setup menu

“Speaker” > “Level”

Choices

Front L, Front R, Center, Surround L, Surround R, Surround Back L, Surround Back R,
Presence L, Presence R, Subwoofer

Setting range

-10.0 dB to +10.0 dB (0.5 dB increments)

NOTE

 Test tone output helps you to adjust the speaker balance while confirming its effect. For details, see the

following:

▪ “Outputting test tones” (p.116)

 

 

En

114

Summary of Contents for AVENTAGE RX-A880












































































































































































































Reviews: