Yamaha AVENTAGE RX-A880 Owner'S Manual Download

Page: 122 / 203

Adjusting the delay between the direct sound and

surround sound field generation

Adjusts the delay between the direct sound and surround sound field generation.

Higher to enhance the delay effect, and lower to reduce it.

Setup menu

“Sound” > “DSP Parameter” > (sound program) > “Surround Initial Delay”

Setting range

1 ms to 49 ms

NOTE

▪ Available items vary depending on the selected sound program.
▪ To restore the default settings for the selected sound program, select “Reset”.

Adjusting the broadening effect of the surround

sound field

Adjusts the broadening effect of the surround sound field.

Setup menu

“Sound” > “DSP Parameter” > (sound program) > “Surround Room Size”

Setting range

0.1 to 2.0 (higher to enhance the broadening effect)

NOTE

▪ Available items vary depending on the selected sound program.
▪ To restore the default settings for the selected sound program, select “Reset”.

Adjusting the loss of the surround sound field

Adjusts the loss of the surround sound field.

Setup menu

“Sound” > “DSP Parameter” > (sound program) > “Surround Liveness”

Setting range

0 to 10 (higher to enhance the reflectivity)

NOTE

▪ Available items vary depending on the selected sound program.
▪ To restore the default settings for the selected sound program, select “Reset”.

Adjusting the delay between the direct sound and

surround back sound field generation

Adjusts the delay between the direct sound and surround back sound field generation.
Higher to enhance the delay effect, and lower to reduce it.

Setup menu

“Sound” > “DSP Parameter” > (sound program) > “Surround Back Initial Delay”

Setting range

1 ms to 49 ms

NOTE

▪ Available items vary depending on the selected sound program.
▪ To restore the default settings for the selected sound program, select “Reset”.

122

Summary of Contents for AVENTAGE RX-A880












































































































































































































Search results

Summary of Contents for AVENTAGE RX-A880

Reviews:

Related manuals for AVENTAGE RX-A880

Brands by name

Popular brands

Yamaha AVENTAGE RX-A880, Owner'S Manual

Search results

Summary of Contents for AVENTAGE RX-A880

Reviews:

Related manuals for AVENTAGE RX-A880

Brands by name

Popular brands