Yamaha AVENTAGE RX-A880 Owner'S Manual Download

Page: 33 / 203

Connecting to the jack on the front panel

Use the AUX jack on the front panel to temporarily connect devices such as portable

audio players to the unit.

CAUTION

▪ Before making a connection, stop playback on the device and turn down the volume on the unit. The

volume may be unexpectedly loud, and this could result in damage to hearing.

NOTE

You need to prepare the audio cable that matches the output jacks on your device.

AUX

AUDIO

(CONNECT)

PHONES

TONE CONTROL

USB

SILENT CINEMA

STRAIGHT

PROGRAM

YPAO MIC

SCENE

VOLUME

The unit (front)

Portable audio player

If you select “AUX” as the input source by pressing INPUT, the audio played back on
the device will be output from the unit.

Summary of Contents for AVENTAGE RX-A880












































































































































































































Search results

Summary of Contents for AVENTAGE RX-A880

Reviews:

Related manuals for AVENTAGE RX-A880

Brands by name

Popular brands

Yamaha AVENTAGE RX-A880, Owner'S Manual

Search results

Summary of Contents for AVENTAGE RX-A880

Reviews:

Related manuals for AVENTAGE RX-A880

Brands by name

Popular brands