YDP-C71 Owner’s Manual
Appendix
27
E
NGLISH
Troubleshooting
Problem
Possible Cause and Solution
The instrument does not turn on.
The instrument has not been plugged in properly. Insert the plug of the
power cable into the [AC IN] jack on this instrument, then plug the other
end of the cable into the proper AC outlet on the wall (page 10).
A click or pop is heard when the power is
turned on or off.
This is normal when electrical current is being applied to the instrument.
Noise is heard from the speakers or
headphones.
The noise may be due to interference caused by the use of a mobile
phone in close proximity to this instrument. Turn off the mobile phone, or
move it further away from this instrument.
The overall volume is low, or no sound is
heard.
The Master Volume is set too low. Set it to an appropriate level using the
[MASTER VOLUME] knob (page 12).
Make sure a pair of headphones is not connected to the headphones
jack (page 11).
Make sure that Local Control (page 26) is On.
Pedals do not function.
The pedal cord may not be securely connected to the [PEDAL] jack. Be
sure to insert the pedal cord all the way until the metal part of the cord
plug disappears from view (page 30).
The damper pedal does not function as
expected.
The damper pedal was pressed when the power was turned on. This is
not a malfunction; release the pedal and press it again to reset the
function.
Summary of Contents for Arius YDP-C71
Page 36: ...YCL XXX Owner s Manual ...