Yamaha Arius YDP-C71 Owner'S Manual Download | Manualshive

Page: 10 / 38

background image

Basic Operations

10

YDP-C71 Owner’s Manual

E

NGLISH

Turning the Power On

1

Connect the power cord.

First insert the plug of the power cable into the [AC IN] jack on your instrument, then plug the other end of the cable into

the proper AC outlet on the wall. For an illustration of the location of the [AC IN] jack, see “Panel Controls and

Terminals” (page 8). In some areas a plug adaptor may be provided to match the pin configuration of the AC wall

outlets in your area.

WARNING

• Make sure your instrument is rated for the AC voltage supplied in the area in which it is to be used (voltage rating

appears on the name plate on the bottom panel). In some areas, a voltage selector may be provided on the bottom

panel of the main keyboard unit near the [AC IN] jack. Make sure that the voltage selector is set for the voltage in your

area. Connecting the unit to the wrong AC supply can cause serious damage to the internal circuitry and may even

pose a shock hazard!

• Use only the AC power cord supplied with your instrument. If the supplied cord is lost or damaged and needs to be

replaced, contact your Yamaha dealer. The use of an inappropriate replacement can pose a fire and shock hazard!

• The type of AC power cord provided with your instrument may be different depending on the country in which it is pur-

chased. Do NOT modify the plug provided with your instrument. If the plug does not fit the outlet, have a proper outlet

installed by a qualified electrician.

2

Press the [

] power switch to turn the power on.

Power indicator

If you close the key cover without turning the power off, the power indicator remains lit, indicating that the power is still
on.

When you’re ready to turn off the power, press the power switch again. The power indicator turns off.

CAUTION

Even when the instrument is turned off, electricity is still flowing to the instrument at the minimum level. When you are not
using the instrument for a long time or during electrical storms, make sure you unplug the AC power plug from the wall AC
outlet.

The shape of the plug
differs depending on the
locale.

Power indicator

[POWER]

«
...
8
9
10
11
12
...
»

Summary of Contents for Arius YDP-C71







































Reviews:

No comments

Related manuals for Arius YDP-C71

NEON K75 RGB series

Brand: Rosewill Pages: 16

Brand: FAME Pages: 16

Brand: Safe Fleet Pages: 28

Brand: 4GAMING Pages: 21

Brand: Fatar Pages: 18

Brand: Split Phantom Pages: 20

Brand: Nav TV Pages: 3

Brand: Matias Pages: 2

Brand: perixx Pages: 12

Brand: usa-spec Pages: 12

Brand: Sharper Image Pages: 5

Brand: Streamax Pages: 38

Brand: VACGEN Pages: 35

Brand: Vacron Pages: 25

Brand: Spirit Pages: 39

PERIBOARD-805L II

Brand: perixx Pages: 69

Brand: xanigo Pages: 15

Brand: YATOUR Pages: 13

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands