3-9
Engine Compartment
Operate the bilge blower switch
1
for
at least 4 minutes before starting the
engines. Open engine hood and check
to be sure no gasoline vapors are pre-
sent. Check for fuel leaks or loose elec-
trical connections.
Blower motor
Gasoline vapors can explode. Before
starting the engines, operate the
blower for at least 4 minutes and
check the engine compartment bilge
for gasoline vapors. Do not start the
engines if you can smell fuel vapors
in the engine compartment or if there
are any loose electrical connections.
Contact your dealer if there is a prob-
lem you cannot locate or correct.
Lights
Check for proper operation of the bow,
stern, and instrument lights by pressing
the switch
3
on the control panel.
If the stern light is not installed, remove
it from the storage area, lift the socket
cover, and install it into the socket to
check operation.
O
PERATION
3
WARNING
BILGE
STEREO CTSY. LT.
LIGHTS
HORN
NO WAKE MODE
FOR OPERATING INSTRUCTIONS
CONSULT OWNERS MANUAL
11 12 13 14 15 16 17 18 19 20
21 22 23 24 25 26 27 28 29 30
31 32 33 34 35 36 37 38 39 40
41 42 43 44 45 46 47 48 49 50
51 52 53 54 55 56 57 58 59 60
1 2 3 4 5 6 7 8 9 10
11 12 13 14 15 16 17 18 19 20
21 22 23 24 25 26 27 28 29 30
31 32 33 34 35 36 37 38 39 40
41 42 43 44 45 46 47 48 49 50
51 52 53 54 55 56 57 58 59 60
1 2 3 4 5 6 7 8 9 10
11 12 13 14 15 16 17 18 19 20
21 22 23 24 25 26 27 28 29 30
31 32 33 34 35 36 37 38 39 40
41 42 43 44 45 46 47 48 49 50
51 52 53 54 55 56 57 58 59 60
1 2 3 4 5 6 7 8 9 10
11 12 13 14 15 16 17 18 19 20
21 22 23 24 25 26 27 28 29 30
31 32 33 34 35 36 37 38 39 40
41 42 43 44 45 46 47 48 49 50
51 52 53 54 55 56 57 58 59 60
1 2 3 4 5 6 7 8 9 10
Summary of Contents for AR230 High output
Page 1: ......
