Yamaha AR210, Owner'S Manual

Page: 51 / 117

PRE-OPERATION
CHECKS
CHECK LIST
Before operating this boat, perform the
following checks:
If any item in the Pre-Operation
check is not working properly, have
it inspected and repaired before
operating the boat. Otherwise an
accident could occur.
3-4
3
O
PERATION
ITEM CHECK
PAGE
REF.
BEFORE LAUNCH OR OPERATION:
STEERING Check for proper steering operation. 3-5
THROTTLE Check for proper throttle operation. 3-5
SHIFTING Check for proper shift operation. 3-5
LIGHTS AND HORN Check lights to be sure they operate. 3-9 0
Press horn button to be sure it operates. 3-10
FIRE EXTINGUISHER Check readiness of the extinguisher. 3-6
HULL Check the hull for damage or cracks
before launching.
ACCESS PORT CAPS Check for proper installation. 3-6
JET (WATER) Check that no debris is in the intakes 3-7
INTAKES before launching.
FUEL SYSTEM Check fuel system for leaks. 3-7, 4-10
FUEL AND ENGINE Check fuel and oil level; add as necessary. 3-7
OIL LEVELS
BATTERY Check battery condition, mounting, and connection. 3-7
DRAINAGE SYSTEM Check, and remove all water and fuel residue 3-7
before launching. Be sure drain plugs are tightened.
ENGINE Operate the blower for at least 4 minutes. 3-9
COMPARTMENT Open engine hood and check to be sure no
gasoline vapors are present.
ENGINE HOOD Check that hood latch is secure. 2-17
BIMINI TOP Check that the top is secure. 3-11
AFTER LAUNCH
SWITCHES Check operation of the ignition start switches 3-10
and engine stop switch lanyard.
COOLING WATER Check that water comes out while the 3-10
WARNING
NOTE: Steering and Shifting Pre-Operation Checks will require two persons, one person to operate
controls and one person to observe proper operation at the stern.