6-32
PERIODIC MAINTENANCE AND MINOR REPAIR
1
2
8
9
EAU01579
Supporting the motorcycle
Since the Yamaha AG200F has no
centerstand, follow these precau-
tions when removing the front and
rear wheel or performing other
maintenance requiring the motor-
cycle to stand upright. Check that
the motorcycle is in a stable and
level position before starting any
maintenance. A strong wooden
box can be placed under the
engine for added stability.
Front wheel service
To stabilize the rear of the motor-
cycle, either use a motorcycle
stand or place a motorcycle jack
under the frame in front of the rear
wheel to prevent it from moving
from side to side. Then use a
motorcycle stand to elevate the
front wheel off of the ground.
Rear wheel service
Use a motorcycle stand or motor-
cycle jack to elevate the motorcycle
so the rear wheel is off the ground.
Alternatively, two jacks can be
placed under the frame or
swingarm.
1
2
EAU00908*
Front wheel removal
EW000122
w
8
It is advisable to have a
Yamaha dealer service the
wheel.
8
Securely support the motorcy-
cle so there is no danger of it
falling over.
1. Remove the clip holding the
speedometer cable in the
speedometer gear housing.
Then remove the speedometer
cable by pulling it outward.
1.
Speedometer cable
2.
Clip
3GX-9-33 (E) 12/10/07 11:17 AM Page 66
ProCarManuals.com
