6-10
PERIODIC MAINTENANCE AND MINOR REPAIR
1
2
8
9
9. Fill the engine with oil. Install
the oil filler cap and tighten.
EC000066
c
C
8
Do not put in any chemical
additives. Engine oil also lubri-
cates the clutch and additives
could cause clutch slippage.
8
Be sure no foreign material
enters the crankcase.
10. Start the engine and warm up
for a few minutes. While
warming up, check for oil leak-
age. If oil leakage is found,
stop the engine immediately
and check for the cause.
Recommended oil:
See page 8-1
Periodic oil change:
1.0 L (1.06 US qt)
(0.88 Imp.qt)
With oil filter replacement:
1.1 L (1.16 US qt)
(0.97 Imp.qt)
1
1.
Screw (
×
5)
EAU01094*
Air filter
The air filter should be cleaned at
the specified intervals. It should be
cleaned more frequently if you are
riding in unusually wet or dusty
areas.
1. Remove panel B. (See page 6-6
for panel removal and installa-
tion procedures.)
2. Remove the air filter case fit-
ting screws and the air filter
case cover.
Tightening torque:
Drain plug:
43 Nm (4.3 m
0
kgf,
31.1 ft
0
lbf)
Filter cover screw:
For 6 V model:
7 Nm (0.7 m
0
kgf,
5.1 ft
0
lbf)
For 12 V model:
10 Nm (1.0 m
0
kgf,
7.2 ft
0
lbf)
Drain bolt (filter cover):
10 Nm (1.0 m
0
kgf, 7.2 ft
0
lbf)
3GX-9-33 (E) 12/10/07 11:17 AM Page 44
ProCarManuals.com
