![background image](http://html2.mh-extra.com/html/yamaha/ag08/ag08_user-manual_3060940073.webp)
Audio-related and other issues
Your computer (Windows PC/Mac) does not recognize this product
(
Have you installed the driver?
You must install the Yamaha Steinberg USB Driver if you wish to connect this product to a computer
(Windows PC/Mac).
(
Refer to the following website for how to install the Yamaha Steinberg USB Driver.
https://www.yamaha.com/2/ag08/
No sound is heard
(
Are you using the appropriate settings for the [STREAMING ON/OFF] switch?
(
Are any external devices (such as a mic) or powered monitor speakers connected correctly?
(
Are the connecting cables shorted out or otherwise disconnected?
(
Have you turned on the power of any connected electronic instruments or powered monitor
speakers?
(
Are the [GAIN] knob, the faders, the [MONITOR] knob and the [MONITOR PHONES] [
H
] knob
adjusted appropriately?
(
Is the [LINE/USB] selector switch set correctly?
(
Is the [GAIN HIGH/LOW] selector switch set correctly?
(
Set the switch to [HIGH]. If the volume from the sound source is too low, you may not be able to hear
the sound when this switch is set to [LOW].
(
Is the [MIX MINUS] switch turned on?
(
If you are using Internet livestreaming software, have you adjusted the volume in the software?
Sound is distorted or noisy
(
Is the channel [SIG/PEAK] LED lit up red?
(
Try lowering the [GAIN] knob and turning the [PAD] switch on.
(
Are the [OVER] indicators (red) on the STREAMING OUT LED level meters lit up?
(
Adjust the fader for each channel. [OVER] does not go dark on the STREAMING OUT LED level meters,
even though the volume is turned down on the [MONITOR] and [MONITOR PHONES] [
H
] knobs.
(
Are the levels set too high on the devices connected to this product?
(
Lower the volume of the connected devices.
(
Is the [LINE/USB] selector switch set correctly?
Is the [GAIN HIGH/LOW] selector switch set correctly?
(
Set the switch to [LOW]. If the volume from the sound source is too high, the sound may distort when
the switch is set to [HIGH].
73
Troubleshooting > Audio-related and other issues