NOTE
When you connect a mic plug into the [HEADSET] mic [
] input jack, the audio from the device connected to the [CH1 MIC/LINE]
jack is muted.
NOTE
Use AG08 Controller to set the gain for the signal input from the [HEADSET] mic [
] input jack, instead of using the channel 1 [GAIN]
knob on the top panel. Press the [
] button on the AG08 Controller menu, and select Settings → HEADSET MIC Gain to make the
settings.
[HEADSET] headphones [
H
] output jack
Connect the headset’s headphones here. Normally, the plug is light green. The audio that is output is the same as
that of the headphones [
H
] output jack.
f
[MONITOR PHONES 1 (
H
)/MONITOR PHONES 2 (
H
)] knobs
These knobs adjust the volume for the headphones connected to the headphones [PHONES 1(
H
)/PHONES 2(
H
)]
jacks or the [HEADSET] headphones [
H
] output jack.
g
[MIX MINUS CH1/MIX MINUS CH2] switch
When this is turned on (
O
), the sound inputted to channels 1 and 2 is not output to the [PHONES 1(
H
)/PHONES
2(
H
)] jacks (monitoring OFF). Use this when you don’t want to hear your own voice during monitoring.
For example, turn the [MIX MINUS] switch on when there is no need to hear your own voice or your own playing in
headphones during a livestream or when recording.
21
Component names and functions > Front side
