2-6
MAINTENANCE SPECIFICATIONS
Tilt limit* (IN)
----
2.5°/1.6 mm
(2.5°/0.063 in)
Tilt limit* (EX)
----
2.5°/1.6 mm
(2.5°/0.063 in)
Direction of winding (top view) (IN)
Clockwise
----
Direction of winding (top view) (EX)
Clockwise
----
Piston:
Piston to cylinder clearance
0.030–0.055 mm (0.0012–0.0022 in)
0.1 mm (0.004
in)
Piston size "D"
76.955–76.970 mm (3.0297–3.0303 in)
----
Measuring point "H"
8 mm (0.31 in)
----
Piston off-set
0.5 mm (0.020 in)/IN-side
----
Piston pin bore inside diameter
16.002–16.013 mm (0.6300–0.6304 in)
16.043 mm
(0.6316 in)
Piston pin outside diameter
15.991–16.000 mm (0.6296–0.6299 in)
15.971 mm
(0.6288 in)
Piston rings:
Top ring:
Type
Barrel
----
Dimensions (B × T)
0.90 × 2.75 mm (0.04 × 0.11 in)
----
End gap (installed)
0.15–0.25 mm (0.006–0.010 in)
0.50 mm (0.020
in)
Side clearance (installed)
0.030–0.065 mm (0.0012–0.0026 in)
0.12 mm (0.005
in)
2nd ring:
Type
Taper
----
Dimensions (B × T)
0.80 × 2.75 mm (0.03 × 0.11 in)
----
End gap (installed)
0.30–0.45 mm (0.012–0.018 in)
0.80 mm (0.031
in)
Side clearance (installed)
0.020–0.055 mm (0.0008–0.0022 in)
0.12 mm (0.005
in)
Item
Standard
Limit
Summary of Contents for 2013 WR205F
