– 75 –
Installing the Crankcase
Tightening the bolts
1. Tighten the bolts in the tightening sequence of 1 to 10 to 20N•m (2.0kg•m).
2. After loosening the bolts once in the tightening sequence of 1 to 10, retighten them one by
one to 12N•m (1.2kg•m).
3. Retighten the bolts in the tightening sequence of 1 to 7 to a turn-of-nut angle of 50°±5°.
4. Retighten the bolts in the tightening sequence of 8 and 9 to a turn-of-nut angle of 75°±5°.
5. Retighten the bolt in the sequence of 10 to a turn-of-nut angle of 50°±5°.
6. Tighten the bolts in the tightening sequence of 11 and 12 to 24±2N•m (2.4±0.2kgf•m).
7. Tighten the bolts in the tightening sequence of 13 to 29 to 10±2N•m (1.0±0.2kgf•m).
TIP
The numbers 1 to 29 show the sequence in which the bolts are tightened.
Apply engine oil to the bolt threads and both sides of the washers.
These numbers indicate the tightening sequence.
Summary of Contents for 2010 YZF-R6
