Yamaha 2010 YZF-R6, Manual Instruction

Page: 34 / 81

– 30 –
21. Wire Harness Set (13S-F2590-71)
NOTICE
•
Do not remove the AC generator but leave it to function. Use on the battery alone will
make the machine unable to run in a short time.
•
The wire harness will not function if it is not assembled with the ECU (2C0-8591A-90)
of the kit.
•
The combination of this wire harness and ECU cannot be used with ’07 models.
•
Map select switches Map 1 and Map 2 of the YMS “Comp. FUEL.”
NOTICE
When switching to Map 1 or Map 2 using “Map Select” while riding, check that proper
riding is possible even when using either map.
•
You can use Map Select and Pit Road Limiter with the switches (2 types) included with this
set. (See diagram 1.)
Parts List
No. PART No. PART NAME Q'TY REMARKS
1 13S-82590-71 WIRE HARNESS ASSY 1
* 2 5GF-83976-00 SW. HANDLE 1 1 PIT ROAD LIMITER
3 14B-83976-70 SW. HANDLE 1 1 MAP SELECT
4 2C0-2128A-70 BRKT.,REGULATOR 1 1
5 2C0-82509-70 WIRE SUB-LEAD 1
6 4C8-82188-70 RESISTOR ASSY. 1 Linked to wire harness
* 7 90480-13003 GROMMET 2
* 8 90560-06201 SPACER 2
* 9 90111-06051 BOLT, HEX. SOCKET
BUTTON 4
* 10 92907-06200 WASHER, PLAIN 1
Map select
1
→
Map 1
2 → Map 2
Main switch
Pit road
limiter
Engine stop
switch
Starter switch
(Diagram 1)