89
2. Voltage
• Connect the pocket tester (DC 20 V) to the
headlight and high beam indicator light cou-
plers as shown.
å
When the dimmer switch is set to “
2
”
∫
When the dimmer switch is set to “
1
”
Headlight
Tester positive probe
→
Yellow
1
or
Green
2
Tester negative probe
→
Black
3
High beam indicator light
Tester positive probe
→
Yellow
4
Tester negative probe
→
Black
5
Headlight coupler (wire harness side)
• Set the main switch to “ON”.
• Set the dimmer switch to “
2
” or “
1
”.
ELEC
LIGHTING SYSTEM
The wiring circuit
from the main switch
to the headlight cou-
pler is faulty and must
be repaired.
This circuit is OK.
YES
NO
• Measure the voltage (12 V) of Yellow
1
or
Green
2
on the headlight coupler (headlight
side).
• Measure the voltage (12V) of Yellow
4
on
the meter assembly coupler.
• Is the voltage within specification?
1. Meter light bulb and socket.
• Check the meter light bulb and socket for
continuity
Refer to “CHECKING THE BULBS AND
BULB SOCKETS”.
• Are the meter light bulb and socket OK?
Replace the meter
light bulb, socket or
both.
EAS00789
2. A meter light fails to come on.
YES
NO
The wiring circuit
from the main switch
to the meter assem-
bly coupler is faulty
and must be re-
paired.
This circuit is OK.
YES
NO
2. Voltage
• Connect the pocket tester (20 V) to the meter
assembly coupler (wire harness side) as
shown.
Tester positive probe
→
Brown
1
Tester negative probe
→
Black
2
• Set the main switch to “ON”.
• Measure the voltage (12 V) of Brown
1
on the meter assembly coupler (wire harness
side).
• Is the voltage within specification?
