81
ELECTRIC STARTING SYSTEM
ELEC
5. Measure:
• brush length
a
Out of specification
→
Replace the brushes
as a set.
6. Measure:
• brush spring force
Out of specification
→
Replace the brush
springs as a set.
7. Check:
• gear teeth
Damage/wear
→
Replace the gear.
8. Check:
• oil seal
Damage/wear
→
Replace the defective
part(-s).
EAS00772
Assembling the starter motor
1. Install:
• brush holder
1
NOTE:
Align the tab
a
on the brush holder with the slot
in the starter motor rear cover.
2. Install:
• starter motor yoke
1
• end bracket
2
• starter motor front cover
3
NOTE:
Align the projection
a
on the front cover with the
slot
b
on the end cover and starter motor yoke.
Min. brush length
5 mm
Bruch spring force
7.65
10.01 N (780
1.020 g)
