Yamaha 2003 FJR1300, Service Manual

Page: 131 / 162

– 123 –
CHAS
ANTI-LOCK BRAKE SYSTEM (FJR1300A)
l. Tighten the bleed screw to the specified
torque.
m. Fill the brake fluid reservoir to the proper
level with the recommended brake fluid.
Refer to “CHECKING THE BRAKE FLUID
LEVEL” in chapter 3.
(Manual No.: 5JW1-AE1)
WARNING
After bleeding the ABS, check the brake
operation.
▲▲▲ ▲ ▲ ▲▲▲ ▲ ▲ ▲▲▲ ▲ ▲ ▲▲▲ ▲ ▲ ▲▲▲ ▲ ▲ ▲▲▲ ▲ ▲▲▲
T
R
.
.
Bleed screw
6 Nm (0.6 m · kg)
• [D-6] Final check
Checking procedures
1. Check the brake fluid level in the brake mas-
ter cylinder reservoirs.
2. Check the wheel sensors for proper installa-
tion.
3. Perform hydraulic unit operation test 1 or 2.
4. Delete the malfunction codes.
5. Perform a trial run.
• [D-6-1] Checking the brake fluid level of
the brake master cylinder reservoirs
1. Check:
• brake fluid level
Refer to “CHECKING THE BRAKE FLUID
LEVEL” in chapter 3.
(Manual No.: 5JW1-AE1)
• [D-6-2] Checking the wheel sensors for
proper installation
1. Check if the front wheel sensor housing and
the rear wheel sensor housing are installed
correctly. (Refer to “[D-3] Maintenance of
the front wheel sensor and sensor rotor”
and “[D-4] Maintenance of the rear wheel
sensor and sensor rotor”.)