Yamaha 2002 YB50, Service Manual

Page: 126 / 161

CHAS
HANDLEBAR AND STEERING
6-23
3. Tighten:
• Steering nut
Steps for tightening the steering nut:
1. Tighten the lower ring nut to 3.8 m•kg.
2. Loosen the lower ring nut 1/2 of a turn
and tighten to 0.65 m•kg.
3. Check the steering for smooth operation.
4. Install rubber washer
.
5. Install central ring nut and hand tighten
untill the lower and central ring nuts slots
allignet.
6. Install the lock washer .
7. Supporting the lower and central ring nuts,
install and thigten the upper ring nut to 7.5
m•kg.
4. Install:
• Handlebar
• Bolt
• Nut
NOTE:
Match up the bolt on the tooth of the stee-
ring column .
5. Install:
• Flange
NOTE:
Support electrical installation
6. Apply:
• Grease with lithium soap base
(on the end of the accelerator cable and
right end of the handlebar.)
Bolt (handlebar)
4.3 m • kg