Yamaha 2001 YZF-R1M, Owner'S Manual

Page: 27 / 118

INSTRUMENT AND CONTROL FUNCTIONS
3-6
3
To set the clock:
1. Push the “SELECT” button and
“RESET” button together for at
least two seconds.
2. When the hour digits start flashing,
push the “RESET” button to set
the hours.
3. Push the “SELECT” button, and
the minute digits will start flashing.
4. Push the “RESET” button to set
the minutes.
5. Push the “SELECT” button and
then release it to start the clock.
EAU00101
Tachometer
The electric tachometer allows the rider
to monitor the engine speed and keep it
within the ideal power range.
EC000003
CAUTION:
@
Do not operate the engine in the ta-
chometer red zone.
Red zone: 11,750 r/min and above
@
EAU03271
Self-diagnosis devices
This model is equipped with a self-di-
agnosis device for the following electri-
cal circuits:
●
Throttle position sensor
●
Speed sensor
●
EXUP system
If any of those circuits are defective,
the tachometer will repeatedly display
the following error code:
CB-11E
1. Tachometer
2. Red zone
0 r/min for
3 seconds
Circuit-specific
number of r/min
for 2.5 seconds
(See the table
below.) Current
engine
speed for
3 seconds
E_5jj.book Page 6 Monday, August 28, 2000 1:29 PM