Yamaha 2000 V Star XVS650AM Page 27 Owner'S Manual Download

Page: 27 / 105

INSTRUMENT AND CONTROL FUNCTIONS

3-5

EAU00158

Front brake lever

The front brake lever is located on the
right handlebar. Pull it toward the han-
dlebar to apply the front brake.

EAU00162

Rear brake pedal

The rear brake pedal is on the right
side of the motorcycle. Press down on
the brake pedal to apply the rear brake.

EAU00167

Fuel tank cap

To open
Insert the key and turn it 1/4 turn clock-
wise. The lock will be released and the
cap can be opened.

To close
Push the tank cap into position with the
key inserted. To remove the key, turn it
counterclockwise to the original posi-
tion.

E_4xs_Functions.fm Page 5 Tuesday, November 30, 1999 2:34 PM

Summary of Contents for 2000 V Star XVS650AM










































































































Search results

Summary of Contents for 2000 V Star XVS650AM

Reviews:

Related manuals for 2000 V Star XVS650AM

Brands by name

Popular brands

Yamaha 2000 V Star XVS650AM, Owner'S Manual

Search results

Summary of Contents for 2000 V Star XVS650AM

Reviews:

Related manuals for 2000 V Star XVS650AM

Brands by name

Popular brands