manualshive.com logo in svg

Yamaha 2000 V Star XVS650AM, Owner'S Manual, Page: 3 / 105

Share
Download
Yamaha 2000 V Star XVS650AM Owner'S Manual Download Page 3

EAU00005

IMPORTANT MANUAL INFORMATION

Particularly important information is distinguished in this manual by the following notations:

The Safety Alert Symbol means ATTENTION! BECOME ALERT! YOUR SAFETY IS IN-
VOLVED!

WARNING

Failure to follow WARNING instructions could result in severe injury or death to the
motorcycle operator, a bystander or a person inspecting or repairing the motorcycle.

CAUTION:

A CAUTION indicates special precautions that must be taken to avoid damage to the
motorcycle.

NOTE:

A NOTE provides key information to make procedures easier or clearer.

NOTE:

@ 

●

This manual should be considered a permanent part of this motorcycle and should remain
with it even if the motorcycle is subsequently sold.

●

Yamaha continually seeks advancements in product design and quality. Therefore, while
this manual contains the most current product information available at the time of printing,
there may be minor discrepancies between your motorcycle and this manual. If there is any
question concerning this manual, please consult your Yamaha dealer. 

@

E_4xs_Info0.fm  Page 1  Tuesday, November 30, 1999  2:31 PM

Summary of Contents for 2000 V Star XVS650AM










































































































Reviews:

No comments