manualshive.com logo in svg

Yamaha 2000 V Star XVS650AM, Owner'S Manual, Page: 63 / 105

Share
Download
Yamaha 2000 V Star XVS650AM Owner'S Manual Download Page 63

PERIODIC MAINTENANCE AND MINOR REPAIR

6-13

6

4. Install the air filter on the air filter

case as shown.

5. Align the match marks and install

the air filter case cover.

EC000082

CAUTION:

@ 

●

Make sure the air filter is prop-
erly seated in the air filter case.

●

The engine should never be run
without the air filter installed.
Excessive piston and/or cylin-
der wear may result. 

@

EAU00630

Carburetor adjustment

The carburetors are important parts of
the engine and require very sophisti-
cated adjustment. Most adjustments
should be left to a Yamaha dealer who
has the professional knowledge and
experience to do so. However, the idle
speed may be adjusted by the owner
as part of routine maintenance.

EC000095

CAUTION:

@ 

The carburetors were set at the
Yamaha factory after many tests. If
they are changed, poor engine per-
formance and damage may result. 

@

1. Holder
2. Projection
3. Slot

1. Match marks

E_4xs_Periodic.fm  Page 13  Tuesday, November 30, 1999  2:36 PM

Summary of Contents for 2000 V Star XVS650AM










































































































Reviews:

No comments