Yamaha 01x Page 69 Owner'S Manual Download

Page: 69 / 156

01X Owner’s Manual

Recording/Playback/Remote Control

Before Using

Basics Section

Appendix

Getting Started

Reference

If desired, click the Control Panel button and adjust the

latency (Preferred Buffer Size).

For details on setting the latency, refer to the separate

Installation Guide.

Click OK to finish.

ASIO Driver Setup

From the Devices menu, select “VST Inputs.”

Activate all the inputs you intend to use.

Click on the [power] button to activate a desired input.

Up to 24 inputs (refer to the mLAN Auto Connector

explanation of the separate Installation Guide) can be

activated simultaneously.

• The channel numbers that are actually in effect mirror the set-

tings of mLAN Auto Connector (see the separate Installation

Guide).

• When the 01X is set to 96kHz/88.2kHz operation, mLAN output

(from 01X to the computer) is limited to 16 channels. In this

case, the maximum number of input channels that can be acti-

vated is 16.

Summary of Contents for 01x





























































































































































Search results

Summary of Contents for 01x

Reviews:

Related manuals for 01x

Brands by name

Popular brands

Yamaha 01x, Owner'S Manual

Search results

Summary of Contents for 01x

Reviews:

Related manuals for 01x

Brands by name

Popular brands